The Audioengine W3 Premium Wireless Audio Adapter allows you to play all your music wirelessly from your computer or any other audio device to powered speakers, powered subwoofer, home theater surround system or stereo system. The device affords CD-quality stereo playback. Also, it supports the ability to broadcast to multiple receivers without compromising audio quality.
Easy Setup and Simple Operation
Get more out of Audioengine unique W3 Premium Wireless Audio Adapter when you bypass your computer’s sound card or headphone jack and send wireless audio to any music system. W3 will transmit all music file formats from any computer media player and can also simultaneously transmit audio to up to 3 wireless receivers. The W3 Adapter has a 30 metre typical range, low latency, built-in DAC and resistance to interference and dropouts. These features make W3 the best-sounding 16-bit wireless system available.
Unwire Your Music
The Audioengine W3 exists to play your music wirelessly from a computer or any audio device to Audioengine’s powered speakers, a stereo receiver, or powered subwoofer. Hear all your music – no dropouts, static, or noise. A great deal of engineering means your music remains free from interference from wireless routers, cordless and mobile phones, microwave ovens, Bluetooth and WiFi devices. Audioengine W3 is wireless that works.
Hear the Difference
The upgraded W3 offers CD-quality stereo sound with no compression and can handle USB audio up to 16 bits/48KHz, as well as analog audio via a 3.5mm mini-jack. The Audioengine W3 sets a new level of quality and ease-of-use for wireless audio. Even if you’re not an audio enthusiast, we guarantee you will hear a difference.
Features
Easy setup, connects in seconds
Works with Mac or PC (or without a computer)
Plug-n-play, no software to download or install
Super-compact size, no batteries required
100 ft (30 m) range with no dropouts or interference
CD-quality stereo sound with no reduction in audio quality
Plays all music formats from any media player
Replaces any RCA or mini-jack (3.5mm) cable!
WORKS WITH
Desktop computers, laptops, notebooks
Flat panel TVs with an analog output
iPods and all other music players
Internet radio and network music systems
DVD/CD players
Videogame consoles
Digital radio and satellite receivers
Subwoofers and surround sound receivers
All other products with 1/8″ inch-jack or RCA connectors!
WHAT’S IN THE BOX (SENDER)
(1) Wireless Audio Sender
(1) Wireless Audio Receiver
(1) USB AC power adapter
(1) RCA adapter “Y” cable (12″)
(2) Mini-jack (3.5mm) audio cables (20″)
(1) Setup Guide
Specifications
DAC type
Dual mode USB and analog (via CS5343 ADC) wireless DAC
Inputs
USB audio, mini-jack analog
Outputs
analog mini-jack
DAC
CS4344
ADC
CS5343
Full scale output
1.0Vrms
Output impedance
470 ohms
Power source
Sender: USB from computer or adapter
Receiver: USB power adapter
Power requirements
Sender: 180mA, 5V
Receiver: 150mA, 5V
SNR
95dB
THD+N
0.01%
Crosstalk
-65dB
Frequency response
20Hz to 20KHz, +/- .2dB
Input bit depth
up to 16 bits native
Input sample rate
up to 48KHz native
USB device class
type 1.1 or above
Wireless range
>100ft
Latency
<20ms
Receivers supported
up to 3
Product dimensions
100x30x10mm (LxWxH)
Shipping weight
1 lb
Included accessories
minijack cable (20″), minijack to RCA adapter (12″), USB power adapter
Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing
Advantages of wireless
The W3 wireless system transmits bit-perfect PCM-stereo simultaneously to up to 3 receivers. Because the USB controller in the Sender and the DAC in the Receiver are segregated by the wireless subsystem, various anomalies which plague many wired DACs such as jitter, grounding, and induced cable noise are greatly reduced. In addition, the W3 allows the user to physically isolate a potentially noisy computer from the sensitive audio components in your system.
W3 USB
The W3 utilizes the TI CC8520 PurePath™ USB wireless system-on-a-chip solutions, TI’s newest offering to the wireless audio arena. The Sender can be powered directly from the USB bus or from the included external power adapter.
W3 DAC
The W3 Receiver utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3 presents impressive low noise and low distortion characteristics.
Free shipping
Within New Zealand
Guaranteed Quality
NZ Audio guarantees the quality of all its products