Audioengine

Audioengine D2R Add-On Receiver For D2

$599.00
  • Audioengine D2R Add-On Receiver For D2

Audioengine

Audioengine D2R Add-On Receiver For D2

$599.00

D2R Add-On Receiver is a perfect expansion kit for your D2 24-bit Wireless DAC. Audioengine’s D2R Add-On Receiver for D2 allows you to add up to two separate D2R wireless receivers to the D2 DAC set and stream HD wireless music to multiple rooms at the same time. You can add up to 2 D2R add-on Receivers for a total of 3 zones. It connects wirelessly to your existing D2 setup and can output 24 bit/96KHz digital or analog audio to your high-end system or powered speakers. With this, you can add sound to an additional room, or even make your Audioengine S8 Powered Subwoofer wireless.

Versatility and Setup

The setup is easy and straightforward. No software or drivers needed. Wireless bit-perfect 24/96 digital-to-analog converter, works with any USB-to-S/PDIF converter, Mac or PC plug-and-play. Precision receiver re-clocking for low jitter USB and optical inputs Optical and analog outputs based on Burr-Brown PCM1792 DAC.

Designed For the Computer Audiophile

D2 receiver works fine with any computer (Mac or PC). Works with any USB-to-SPDIF converter, to use with your favorite DAC. D2 Receiver comes with a power supply detachable power cord, 1.5m (~5ft) RCA audio cable, 2m (~6.5ft) and a microfiber product bag. D2R also works with any TV or product with optical outputs, which makes it a must-have Audioengine product.

Features

Wireless bit-perfect 24/96 digital-to-analog converter
USB-to-S/PDIF converter
Mac or PC plug-and-play, no drivers or network setup
Precision receiver re-clocking for low jitter
USB and optical inputs
Optical and analog outputs
Based on Burr-Brown PCM1792 DAC

WORKS WITH
D2 24 bit wireless DAC

WHAT’S IN THE BOX
(1) D2 Receiver
(1) Power supply
(1) Detachable power cord, 1.5m (~5ft)
(1) RCA audio cable, 2m (~6.5ft)
(1) Microfiber product bag
(1) Setup Guide
(1) Product line brochure

WHAT’S IN THE BOX (RECEIVER)
(1) D2 Receiver
(1) Power supply
(1) Detachable power cord, 1.5m (~5ft)
(1) RCA audio cable, 2m (~6.5ft)
(1) Microfiber product bag
(1) Setup Guide
(1) Product line brochure

Specifications

DAC type
Dual Mode USB and Optical (SPDIF) wireless DAC

Outputs
RCA Stereo/Optical (SPDIF)

D/A converter
PCM1792A

Optical receiver
AK4117

Full-scale output
2.0V RMS

Output impedance
100 ohms

Power source
Included external supply

SNR
(DC to 20 kHz) >115dB

THD+N
(1kHz FS 96kS/s) <0.0015%

Crosstalk
<-85dB

Frequency response
10Hz-30KHz (+/- 0.5dB)

Wireless range (typical)
>100ft

Latency
<20ms

Product dimensions
4.75×5.5×1″

Shipping weight
4lbs (2.0kg)

Shipping box dimensions
15x9x5″

Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Included accessories
RCA cable, 6.5ft
Power adapter with detachable AC cord
Microfiber bag
Setup Guide

D2 DAC
The D2 Receiver utilizes the PCM1792 DAC, widely know for it’s low noise and high fidelity. Due to the PCM1792’s high signal-to-noise specs and the added benefit of triple redundancy power source conversion and filtering, the D2 presents impressive low noise and low distortion characteristics.

  • Warranty details can be found here

    Terms and shipping details can be found here

Free shipping

Within New Zealand

Guaranteed Quality

NZ Audio guarantees the quality of all its products